rev windows vpn instructions

vpn_instructions/windows_vpn.md

@@ -1,16 +1,17 @@
 # Connect a Microsoft Windows system to your Bubble VPN
 
-  * Download and install WireGuard for Windows: https://download.wireguard.com/windows-client/wireguard-amd64-0.1.0.msi
-    * Note: If you are running a 32-bit version of Windows, you must install the 32-bit version of Wireguard: https://download.wireguard.com/windows-client/wireguard-x86-0.1.0.msi
-    * Most newer Windows systems are 64-bit. To determine if your Windows is 64-bit or 32-bit, follow these instructions: https://www.lifewire.com/am-i-running-a-32-bit-or-64-bit-version-of-windows-2624475
+  * Download and install [WireGuard for Windows](https://download.wireguard.com/windows-client/wireguard-amd64-0.1.0.msi)
+    * Note: If you are running a 32-bit version of Windows, you must install the [32-bit version of Wireguard](https://download.wireguard.com/windows-client/wireguard-x86-0.1.0.msi)
+    * Most newer Windows systems are 64-bit. To determine if your Windows is 64-bit or 32-bit, [follow these instructions](https://www.lifewire.com/am-i-running-a-32-bit-or-64-bit-version-of-windows-2624475)
+    * You can find more information about the WireGuard installers on the [WireGuard Installation page](https://www.wireguard.com/install/)
   * Run the WireGuard msi installer that you just downloaded
-  * You will see a few warning dialogs to confirm that you really want to install WireGuard. Depending on the dialog, click "OK", "Run", "Yes", or "Install" to continue.
+  * You will see several warning dialogs to confirm that you really want to install WireGuard. It is safe to install WireGuard; depending on the dialog, click "OK", "Run", "Yes", or "Install" to continue.
   * Login to your Bubble
   * Navigate to the Devices screen
   * In the "Add Device" section, enter a name for your Windows system and click or tap the "Add" button to add it.
   * Click or tap "Show VPN connection info" for your new Windows device. Click the button that reads "Download vpn.conf file"
   * Save the vpn.conf file to your computer.
-  * Open the WireGuard application if it is not already open.
+  * Open the WireGuard application if it is not already open. You should see a screen like the one below.
   * Click the "Import tunnel(s) from file" button, and select the vpn.conf file that you downloaded.
   * Click the "Activate" button to connect to the VPN.
   * If a "Set Network Location" dialog appears, click on "Public network", then click the "Close" button.