try to get images to show up in gitea

cert_instructions/ios_cert.md

@@ -8,27 +8,34 @@
  
  * Tap "Allow" to download the profile
  * You should now see a pop-up titled "Profile Downloaded" as in the screenshot below. Tap the Close button on this pop-up.
+ 
  <img src="ios_screenshots/02_profile_downloaded.png" alt="screenshot of profile downloaded message" height="500"/>
  
  * Open the "Settings" app on your phone. You should see a "Profile Downloaded" section near the top of your Settings screen, see screenshot below for an example. Tap "Profile Downloaded"
+ 
  <img src="ios_screenshots/03_profile_in_settings.png" alt="screenshot of settings screen with profile" height="500"/>
  
  * You should now see a profile screen that matches the name of your Bubble, like the screenshot below. In the top-right corner of the screen, tap "Install"
+ 
  <img src="ios_screenshots/04_install_profile.png" alt="screenshot of profile before installation" height="500"/>
  
  * You'll see a "Warning" screen with a message about the certificate. In the top-right corner of the screen, tap "Install". An "Install" button will now appear at the bottom of your screen - tap this "Install" button to finish installing the certificate.
  * You'll now be back on the certificate screen and it should show a green "Verified" message, like in the screenshot blow. In the top-right corner of the screen, tap "Done"
+ 
  <img src="ios_screenshots/05_profile_installed.png" alt="screenshot of profile after installation" height="500"/>
 
  * Tap the "Back" button in the top-left corner of the screen to access General Settings. If you've closed your Settings app, re-open Settings and scroll down to "General", tap "General"
  * At the top of the General Settings screen (screenshot below), tap "About"
+ 
   <img src="ios_screenshots/06_general_settings.png" alt="screenshot of 'General' settings" height="500"/>
  
  * Scroll all the way to the bottom of the "About" screen and tap "Certificate Trust Settings", see screenshot below
+ 
   <img src="ios_screenshots/07_about_settings.png" alt="screenshot of 'About' settings" height="500"/>
  
  * You should now see the certificate you just installed. Tap the toggle switch to enable it.
  * When you tap the toggle switch, you'll see a warning like the screenshot below. You'll see the message "Warning: enabling this certificate for websites will allow third parties to view any private data sent to websites." This is OK, there is no third party here -- your Bubble is only yours. Tap "Continue"
+ 
   <img src="ios_screenshots/08_trust_settings.png" alt="screenshot of 'Certificate Trust' settings" height="500"/>
  
  * Congratulations! You have successfully installed your Bubble certificate!

vpn_instructions/ios_vpn.md

@@ -18,7 +18,7 @@
    * A camera view will open. Scan the QR code shown on your other device. You'll be asked to provide a name for the tunnel. You can choose anything, but it's probably easiest to use the name of your Bubble. See the screenshot below for an example.
  <img src="ios_screenshots/03_set_vpn_name.png" alt="screenshot of WireGuard app adding VPN using QR code" height="500"/>
  
-   * You'll now see a pop-up titled "WireGuard Would Like to Add VPN Configurations", like the screenshot shown below. Tap "Allow" and then enter your passcode
+   * You'll now see a pop-up titled "WireGuard Would Like to Add VPN Configurations", like the screenshot shown below. Tap "Allow" and then enter your passcode.
  <img src="ios_screenshots/04_allow_vpn_config.png" alt="screenshot of WireGuard app requesting permission to add a VPN" height="500"/>
  
    * You'll now see your VPN connection listed, as shown below. Tap the toggle switch to turn it on.